Wavetronix SmartSensor HD (101-0415) - User Guide Uživatelský manuál stáhnout pdf (Strana 82)

Appendix

In this chapter

 Appendix A - 10-pin Connector

 Appendix B - 26-pin Connector

 Appendix C - Cable Lengths

 Appendix D - Direct Serial Connections

 Appendix E - Signaling Delays

Appendix A - 10-pin Connector

Many newer SmartSensor HD installations have a 10-pin connector for attaching the cable;

this connector is used exclusively with the 8-conductor cable. is cable is composed of

eight conductors plus a drain wire, all surrounded by a shield. See Figure A.1 for a diagram

of the 8-conductor cable’s 10-pin socket assignment. e codes listed in the diagram are to

be used to solder wires into the back of the plug where the letters represent the individual

solder cups.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 88 89

SmartSensor HD 2
Contents 4
Chapter 5 Settings 47 5
Chapter 6 Lanes 53 5
Chapter 7 Data 65 5
Chapter 8 Tools 77 5
Appendix 81 5
Introduction 6
Selecting a Mounting Location 7
Roadway Roadway 8
9–50 ft 8
Installing the SmartSensor HD 10
In this chapter 12
Selecting the Mounting Height 13
Figure 1.4) 16
SSMHD has been installed 17
Connecting the Cable 18
Connecting Power and Surge 2 20
Wiring the Click 200 23
Wiring to Earth Ground 24
Installing the Power Plant 25
Wiring in AC 26
Wiring the Click 210 26
Wiring the Click 230 27
Wiring the Click 201/202 28
Wiring Communication 30
Using SmartSensor Manager HD 32
Installing SSMHD 34
Figure 3.3 – Shortcut Options 36
Communication 4 38
Serial Connection 39
Advanced Settings 40
Virtual Connection 41
Additional Settings 42
Virtual Sensor File 42
Troubleshooting Connections 43
Installation Type 44
Communication Screen Icons 44
Address Book 45
Password 45
Communication Error Log 45
Settings 5 48
Ports Tab 49
Outputs Tab 50
50 CHAPTER 5  SETTINGS 51
Figure 5.3 – Outputs Tab 51
CHAPTER 5  SETTINGS 51 52
Lanes 6 54
Sensor Alignment 55
Auto-Conﬁguration 56
56 CHAPTER 6  LANES 57
Tools Icon 57
Tools Menu 57
Manual Conﬁguration 58
Sidebars 58
Vehicle Display 59
Magnifying Glass 60
Shoulder Area 61
Lane Window 61
Saving the Conﬁguration 62
Undoing Manual Changes 62
Play/Pause/Stop Buttons 64
Lane Adjustment 64
64 CHAPTER 6  LANES 65
Deﬁnitions 67
Interval 68
68 CHAPTER 7  DATA 69
Figure 7.3 – Speed Bins 69
Approaches 70
Direction 71
If volume = 0, speed = 0 71
CHAPTER 7  DATA 71 72
Figure 7.5 – Storage 72
Download 73
CHAPTER 7  DATA 73 74
Figure 7.6 – Download 74
74 CHAPTER 7  DATA 75
Figure 7.9 – Data Format 75
CHAPTER 7  DATA 75 76
Figure 7.10 – Data Push 76
Destination 77
Tools 8 78
Back-up File 79
Restore File 79
CHAPTER 8  TOOLS 79 80
80 CHAPTER 8  TOOLS 81
Figure 9.4 – Power 81
Appendix 82
Blue/White 83
Appendix C - Cable Lengths 84
Appendix E - Signaling Delays 87

Komentáře k této Příručce

Žádné komentáře

Wavetronix SmartSensor HD (101-0415) - User Guide Uživatelský manuál Strana 82

Komentáře k této Příručce

Související produkty a manuály pro Senzory Wavetronix SmartSensor HD (101-0415) - User Guide