Wavetronix SMARTSENSOR 105 Instalační příručka Strana 11

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 36
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 10
SmartSensor 105 User Guide – Wavetronix LLC 9/20/07 - -
11
Figure 5 – Short Distance Cable Run
Long Cable Run (41-100 feet)
A long cable installation includes any installation with a SmartSensor cable longer than
40 feet. Follow the steps below to correctly add surge protection to a long cable run (see
Figure 6):
1. Connect the SmartSensor cable from the SmartSensor to the PROTECTED side
of the Click! 200.
2. Mount a Click! 200 (or equivalent) device on the same pole as the protected
sensor, and mount another Click! 200 in the cabinet.
3. A single unspliced, shielded cable must be kept as short as possible and run
between two Click! 200 modules and connected to the UNPROTECTED side of
each device. The shielded cable must contain three shielded pairs and three
conductors equivalent to the Alpha Wire 6010C 3PR 22 AWG shielded cable
(http://www.alphawire.com/pages/228.cfm
).
4. If a Click! 172 or 174 input file card is being used for contact closure outputs,
then the RS-485 cable and the 24 VDC power in the controller cabinet must be
attached to the PROTECTED side of the Click! 200.
Zobrazit stránku 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Komentáře k této Příručce

Žádné komentáře

Dynex DX-WLOM2 - Wireless Optical Mouse Handbücher

Bedienungsanleitungen und Benutzerhandbücher für Mäuse Dynex DX-WLOM2 - Wireless Optical Mouse.
Wir stellen 1 PDF-Handbücher Dynex DX-WLOM2 - Wireless Optical Mouse zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Betriebsanweisung






Weitere Produkte und Handbücher für Mäuse Dynex

Modelle Dokumententyp
DX-WLMSE Spezifikationen     Dynex DX-WLMSE Specifications, 46 Seiten
DX-WMSE - Wired Optical Mouse Bedienungsanleitung      Dynex Wired Optical Mouse, 20 Seiten