Wavetronix SmartSensor Advance Extended Range (SS-200E) - Use Uživatelský manuál Strana 19

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 148
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 18
18 CHAPTER 1 INSTALLING THE SMARTSENSOR ADVANCE
Figure 1.3 – Attaching the Mount Bracket to the Pole
4 Using the swivel joints (see Figure 1.4), pan and tilt the mount so that the mount head
points roughly to target distance in the center of the lanes of interest. (e viewnder
will be used later to help you achieve a more precise alignment.)
If the sensor is on a vertical pole, rst use swivel joint 1 to pan, then use swivel joint 2
to tilt. If the sensor is on a horizontal pole, rst use swivel joint 1 to tilt then use swivel
joint 2 to pan.
1
2
Figure 1.4 – Swivel Joints
Attaching the Sensor to the Mount Bracket
1 Align the bolts on the sensors backplate with the holes in the mount bracket. e 8-pin
connector on the sensor should be pointing towards the ground.
2 Place the lock washers onto the bolts aer the bolts are in the mount bracket holes.
3 read on the nuts and tighten (see Figure 1.5).
Figure 1.5 – Attaching the Sensor to the Mount Bracket
Zobrazit stránku 18
1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 147 148

Komentáře k této Příručce

Žádné komentáře